Finalising your subscription
To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
X
![Finalising your subscription]()
The standard ladders of the WAGOcan be easily converted. Their specific bolted design makes it easy to alternate between the "straight" (h.: 1,750 mm) and "rounded" (h.: 990 mm) configurations. Your WAGOcan therefore be ideally adapted to all kinds of bales or loads.
The 2''1/2 ball valve fitted as standard on all Aquatrans ensures a perfect watertightness and a quick and easy emptying of your water bowser.
The 70-70 box bolted to the propeller guard allows the JUMBOMIXER to slide easily into the pit if it is equipped with a handling rail with a 70 cm gap between the two rail elements.
All our BETIMAX models are pre-equipped as standard for the installation of a cover. The cover is available as an option and can either be factory fitted at the time of the order or delivered afterwards. It provides some protection for the livestock, either during transport or when the BETIMAX is simply parked in the meadow, creating a temporary shelter.
The drinking trough (70 l) is the most economical solution to give water to several animals at the same time. This system includes of a float and a mechanical valve. As soon as the water level drops below a certain level, the feeding valve opens and transfers the water stored in the tank to the trough until the float gauge reaches its final filling position. When it is reached, the water flow is stopped and the valve is closed. This solution is ideal when your Aquatrans is used as a permanent drinking trough. It can be fitted on the side or at the back of the machine.
The drinking trough for one animal is the most economical solution. This system is equipped with a mechanism connected to a feeding valve. It therefore only gives water when the animal pushes the stop with its mouth; as soon as it withdraws, the valve closes and the water remains in the tank for later. It is therefore an ideal solution when your Aquatrans is parked in a meadow as a permanent drinking trough.
including gun, counter and 4 m of 1'' hose.
For circular lagoons with a large diameter or deep rectangular lagoons, you can equip your JUMBOMIXER with an extension (3.2 m or 4.2 m depending on the model). It is fitted with a quick coupling system, a hydraulic ram to control the angle and a Walterscheid cardan shaft with bolt security.
In order to increase the transported volumes, JOSKIN offers different types of extensions. They are made of steel for Trans-KTP tipping trailers, aluminium for other agricultural tipping trailers, or wood for muck spreaders. From 150 mm to 1,000 mm high, welded, bolted, manually or hydraulically expandable, the choice is yours!
In order to increase the transported volumes, JOSKIN offers different types of extensions.
1 -4-position mechanical extensions (50 - 250 - 400 - 550 mm), with individual adjustment on all 4 sides.
2 -Individually retractable hydraulic side extensions from 50 to 550 mm - manually folding front extension - 4-position mechanical rear part.
3 -4 multi-position hydraulic extensions from 50 to 550 mm (individually retractable).
4 -4 multi-position hydraulic extensions from 50 to 850 mm (individually retractable).
In order to increase the transported volumes, JOSKIN offers different types of extensions. They are made of steel for Trans-KTP tipping trailers, aluminium for other agricultural tipping trailers, or wood for muck spreaders. From 150 mm to 1,000 mm high, welded, bolted, manually or hydraulically expandable, the choice is yours!
In order to increase the transported volumes, JOSKIN offers different types of extensions. They are made of steel for Trans-KTP tipping trailers, aluminium for other agricultural tipping trailers, or wood for muck spreaders. From 150 mm to 1,000 mm high, welded, bolted, manually or hydraulically expandable, the choice is yours!
In order to increase the transported volumes, JOSKIN offers 300 mm high extensionshydraulically expandable
JOSKIN offers different types of extensions bolted to the body in order to further increase the transported volumes. They are made of aluminium or wood and can be up to 250 mm high!
In order to increase the transported volumes, JOSKIN offers different types of extensions. They are made of steel for Trans-KTP tipping trailers, aluminium for other agricultural tipping trailers, or wood for muck spreaders. From 150 mm to 1,000 mm high, welded, bolted, manually or hydraulically expandable, the choice is yours!
In order to increase the transported volumes, JOSKIN offers different types of extensions. They are made of steel for Trans-KTP tipping trailers, aluminium for other agricultural tipping trailers, or wood for muck spreaders. From 150 mm to 1,000 mm high, welded, bolted, manually or hydraulically expandable, the choice is yours!
On 10000T21 models, a 1.5 m hydraulic rear floor extension can be fitted. It allows to increase the transported load easily. This extension can be directly connected to the tractor or on a hand pump.
(only for 1,800 mm high bodies).
JOSKIN trailers can be equipped with a galvanised steel platform. With its large surface area, it offers the user a safe place to work when handling a cover. This platform is usually (but not necessarily) accompanied by a cover and can be fitted on the front of the tipping trailer or on the rear door (or both).
The optional 2''1/2 “gaw” fitted on the Aquatrans ensures a perfect watertightness and a quick and easy emptying of your water bowser while slightly spreading over the width.
The JOSKIN range of agricultural tipping trailers is equipped as standard with a large central grain chute. As an option, it is also possible to install a second one. The Drakkar has 3 grain chutes as standard.
If it is not part of the standard equipment of the vehicle, the spreading table can be equipped with a highly abrasion-resistant Hardox steel protection plate. This is the ideal equipment for intensive use of your muck spreader. In this case, the beater frame is painted green (instead of hot-dip galvanised) so as not to affect the strength of the materials.
As body equipment, the fully galvanised headboard protects the hitch (electric, electronic, hydraulic and/or air hoses), the tractor and the front hydraulic tipping ram (on a Trans-KTP tipping trailer) from falling material.
As an option, the user protection can be increased by bolting a 450 mm high headboard to the front of the muck spreader body.
As body equipment, the fully galvanised headboard protects the hitch (electric, electronic, hydraulic and/or air hoses), the tractor and the front hydraulic tipping ram (on a Trans-KTP tipping trailer) from falling material.
As body equipment, the fully galvanised headboard protects the hitch (electric, electronic, hydraulic and/or air hoses) and the tractor from falling material.
As body equipment, the fully galvanised headboard protects the hitch (electric, electronic, hydraulic and/or air hoses) and the tractor from falling material.
As body equipment, the fully galvanised headboard protects the hitch (electric, electronic, hydraulic and/or air hoses), the tractor and the front hydraulic tipping ram (on a Trans-KTP tipping trailer) from falling material.
Available in 3.5 m or 4.5 m depending on the model, these fences are an efficient and cost-effective solution for any farmer wanting to load livestock on grassland. Supplied in pairs, they can be stored on the body sides without affecting the overall width of the livestock trailer. In the loading position, they can be adjusted to the desired opening degree and are therefore perfectly suited to the circumstances of the terrain. A clever spring suspension also makes them very easy to handle.
HP grain augers are high-performance transfer augers. Depending on the model, they transfer up to 300 tonnes of grains per hour, i.e. 5 tonnes per minute! They are ideal for turning your Trans-CAP or Trans-SPACE tipping trailer into a chaser bin. The auger is installed on a second specific rear door that includes not only the transfer auger (Ø 270 to Ø 400 mm, in steel or stainless steel depending on the model), but also its lateral orientation mechanism. It is driven by a hydraulic motor with medium flow rate (75-100 l/min). It can therefore be used by any type of tractor (new or old).
HPA grain augers are high-performance transfer augers. Depending on the model, they transfer up to 550 tonnes of grain per hour, i.e. 9.16 tonnes per minute! They are ideal for turning your Drakkar into a chaser bin. The auger is installed on a second specific rear door that includes not only the transfer auger (Ø 500 or Ø 600 mm depending on the model) and its orientation mechanism, but also a horizontal breaking auger. In this way, it is also possible to transfer other products of non-cereal origin, such as wood chips, for example.
Hydraulic side ladders are available as an option on some models. They provide an increased security and speed of use. Both sides can be operated independently.
In order to quickly convert your WAGO-CARRIER into a bale trailer, JOSKIN offers a kit of quick-fit ladders. It includes a 'straight' front ladder and a 'rounded' rear ladder (ideal for round bales).
The use of a spreading implement, such as an injector, makes it impossible to see the slurry coming out of the tank. This is why JOSKIN was the first manufacturer to offer a level gauge on all its slurry tankers from the 1980s. Today, there are several possibilities: a 2" half-circular sight glass, an 8 x 30 cm oblong sight glass with a choice of location, a float gauge or a Ø 150 mm transparent communicating gauge.
As the tank of a slurry tanker needs to be cleaned regularly, JOSKIN offers various access solutions, including via the top of the machine, which is particularly useful when the rear of the tanker is not accessible because there is a spreading implement. Examples are the Ø 600 mm side or rear manhole with hook closure, the Ø 850 mm rear manhole on hinge, the full opening rear door, the upper manhole with hook closure or on hinge (Ø 520 mm or Ø 600 mm), etc.
PA-T grain augers are ideal transfer augers for dropside tipping trailers. The PA-T 458 transfers up to 25 t of grain per hour. It is ideal for turning your Delta-CAP, Tetra-CAP or Tetra-SPACE tipping trailer into a chaser bin. The auger is fitted directly on the grain chute and has a 4.15 m long (Ø 140 mm) transfer chute when unfolded laterally. It is driven by a hydraulic motor with low flow rate (20-40 l/min). It can therefore be used by any type of tractor (new or old).
JOSKIN also offers a range of pre-equipment in its programme, so that you can postpone the choice of rear spreading implements and various accessories. The series production and the spare parts book will always allow you to complete your machine in the future.
JOSKIN also offers a range of pre-equipment in its programme, so that you can postpone the choice of rear spreading implements and various accessories, such as the filling arm or the dorsal boom, the hydraulic upper door, the tank mixer, etc. The series production and the spare parts book will always allow you to complete your machine in the future.
JOSKIN also offers a range of pre-equipment in its programme, so that you can postpone the choice of rear spreading implements and various accessories, such as the filling arm or the dorsal boom, the hydraulic upper door, the tank mixer, etc. The series production and the spare parts book will always allow you to complete your machine in the future.
JOSKIN also offers a range of pre-equipment in its programme, so that you can postpone the choice of rear spreading implements and various accessories, such as the filling arm or the dorsal boom, the hydraulic upper door, the tank mixer, etc. The series production and the spare parts book will always allow you to complete your machine in the future.
JOSKIN also offers a range of pre-equipment in its programme, so that you can postpone the choice of rear spreading implements and various accessories. The series production and the spare parts book will always allow you to complete your machine in the future.
JOSKIN also offers a range of pre-equipment in its programme, so that you can postpone the choice of rear spreading implements and various accessories, such as the filling arm or the dorsal boom, the hydraulic upper door, the tank mixer, etc. The series production and the spare parts book will always allow you to complete your machine in the future.
The JOSKIN aerators with an air seeder with hydraulic drive can, as an option, be equipped with a proportional flow system on GPS signal.
In order to protect the communicating gauge from possible shocks and damages, it can be fitted with an optional protective grating.
In order to protect the upper body edge strip from shocks caused by the load or when loading the trailer, it is possible to opt for a PVC protection. It can cover 2 or 3 sides of the body and can easily be replaced in case of wear (bolted structure). When loading sticky materials, such as manure or compost, this protection can also be used as a scraper for the loading implement.
In order to protect the upper body edge strip from shocks caused by the load or when loading the trailer, it is possible to opt for a PVC protection. It can cover 2 or 3 sides of the body and can easily be replaced in case of wear (bolted structure). When loading sticky materials, such as manure or compost, this protection can also be used as a scraper for the loading implement.
In order to protect the upper body edge strip from shocks caused by the load or when loading the trailer, it is possible to opt for a PVC protection. It can cover 2 or 3 sides of the body and can easily be replaced in case of wear (bolted structure). When loading sticky materials, such as manure or compost, this protection can also be used as a scraper for the loading implement.
The optional 1/4-turn tap (2''1/2) fitted on the Aquatrans ensures a perfect watertightness and a quick and easy emptying of your water bowser.
Available in 3.5 m or 4.5 m depending on the model, these fences are an efficient and cost-effective solution for any farmer wanting to load livestock on grassland. Supplied in pairs, they can be stored on the body sides without affecting the overall width of the livestock trailer. In the loading position, they can be adjusted to the desired opening degree and are therefore perfectly suited to the circumstances of the terrain. A clever spring suspension also makes them very easy to handle. The special feature of the rail system is that it offers even more flexibility and allows a full opening, even in narrow spaces such as inside stables.
The Modulo2 can be equipped with a rear pre-equipment in order to fit a linkage system specially designed to minimise stresses on the tank.
SSN grain augers are stainless steel side transfer augers from Ø 170 to Ø 220 mm manufactured according to the EN 14301 food standard. Depending on the model, they transfer from 30 t to 70 t per hour. They are ideal for turning your Trans-CAP or Trans-SPACE tipping trailer or DRAKKAR into a food transporter. The auger is fitted directly on the grain chute and has a 4.5 m to 5 m long (depending on the model) transfer chute when unfolded laterally. It is driven by a hydraulic motor with medium flow rate (35-55 l/min). It can therefore be used by any type of tractor (new or old).
The WAGO-LOADER is equipped with two 710 mm wide loading ramps as standard. They are hydraulically controlled and supported during the loading and unloading operations by two manual rear stands. As an option, these can be hydraulically operated for more comfort. This means that your vehicle always remains perfectly stable during your handling operations.
In order to stabilise the load, additional strap tensioners can be fitted to the back of the bale trailer.
JOSKIN offers several solutions to keep track of the activity of its machines: a counter on float gauge, a pneumatic counter (totaling the number of tankers spread by means of a diaphragm that adds up each depression in the tank), a digital rotation counter (counting the number of times the P.T.O. starts rotating), a vibration hour counter (vibration = machine at work), etc.
These fences are characterised by their versatility: their minimum length is 2 m and they can be extended to 3.6 m by means of a telescopic system. Their storage in the transport position also makes them very practical: they can be folded either to the body sides, without affecting the total width of the livestock trailer, or at the back of the trailer. It is definitely an interesting offer at a low price!
The PVC tool box (380 x 450 x 368 mm) offers enough space to transport a salt block, a bucket with food concentrates, ropes, straps, etc. The brush holder on the front side of the trailer allows you to take the most interesting tools with you.
ZSN grain augers are stainless steel rear transfer augers manufactured according to the EN 14301 food standard. Depending on the model, they transfer from 30 t to 50 t per hour (Ø 170 mm à Ø 200 mm). They are ideal for turning your Trans-CAP or Trans-SPACE tipping trailer or DRAKKAR into a food transporter. The auger is fitted directly on the grain chute and has a 3.15 m to 4 m long (depending on the model) transfer chute when unfolded backwards. It is driven by a hydraulic motor with medium flow rate (35-45 l/min). It can therefore be used by any type of tractor (new or old).
