Finalising your subscription
To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
X
![Finalising your subscription]()
The backward and spaced position of the hinges increases the stability and therefore the safety when unloading.
The backward and upward position of the hinges increases the tipping height. It also makes unloading easier and allows for higher and more compact heaps.
The double oscillating frame on which the ram is mounted allows to absorb the torsions caused by the stresses when tipping and effectively protects the trailer from distortion.
The double oscillating frame on which the hydraulic ram is fitted absorbs the torsion caused by the tipping stresses and effectively protects the tank from deformation.
The forward position of the hydraulic tipping ram reduces the stress on the body and ensures a maximum vehicle stability. Fitted as standard on all models in the JOSKIN range of tipping trailers, a safety valve, placed directly on the hydraulic tipping ram, prevents the body from unexpectedly falling down (e.g. when a hydraulic hose breaks).
The forward position of the hydraulic tipping ram reduces the stress on the tank and ensures a maximum vehicle stability. Fitted as standard on all models in the JOSKIN range of hydrocleaners (except Modulo2 Hydro-Vacuum), a safety valve, placed directly on the hydraulic tipping ram, prevents the tank from unexpectedly falling down (e.g. when a hydraulic hose breaks).
The high-tipping system is an interesting option when you want to feed a high-placed conveyor or a mineral fertiliser spreader. In this case, a 16-l hydraulic ram raises the chassis to make this transfer operation possible.
The telescopic rams fitted by JOSKIN have a chrome coating on the first two elements. This means that you can store your tipping trailers with the body tilted slightly backwards without the risk of rust on the hydraulic tipping ram.
The system consists of a control box in the tractor cab, a level indicator on the front of the body and an automatic height adjustment system. The slope position adjustment is fitted in combination with the Hydro-Pendul running gear. It allows the level of the chassis to be adjusted horizontally so that the tipping trailer can be emptied on uneven ground.
Available as standard on Tetra-CAP, Tetra-SPACE and Delta-CAP and as an option on Trans-EX, this solution increases the versatility of the JOSKIN tipping trailers. It not only facilitates unloading in low buildings, but it also allows to transport more thanks to the possibility of towing a second Tetra-CAP trailer. The side doors are articulated on welded hinges, which are fastened to a steel section. The presence of a large-section gasket around the entire perimeter of the body openings provides a good seal.
The tipping stabiliser is a particularly useful tool when unloading sticky or ‘slow-moving' material that may remain in the body until the last element of the hydraulic tipping ram is extended. In such a case, it is not unusual to have a negative load on the eyelet. The tipping trailer then tends to lift the rear of the tractor. To avoid this, a suspension locking device called "tipping stabiliser" is the solution. For trailers with a bogie, two hydraulic rams installed vertically between the bogie table and the rear axle prevent the parabolic leaves from bending and stabilise the machine. For trailers with a Hydro-Tandem or Hydro-Tridem running gear, an oil blocking device is activated in the axle suspension system and prevents any shock absorbing effect when tipping.
This option increases the versatility of the Trans-CAP tipping trailers: it not only facilitates unloading in low buildings, but it also allows to transport more thanks to the possibility of towing a second Tetra-CAP trailer. The side doors are articulated on welded hinges, which are fastened to a steel section. They are hydraulically unlocked from the tractor cab and have an opening height of 600 mm. Closing them requires no manual intervention. The presence of a large-section gasket around the entire perimeter of the body openings provides a good seal.
