New muck spreader model: Siroko 4008/8V

2016-03-21

NewsPress releases
The race for the biggest machine that governs the development of agricultural machinery should not take us away from the many farmers who still have human-sized farms. Joskin makes it a point of honour to be able to offer a range of products meeting the needs and expectations of every user. With this goal in mind, Joskin adds a new model to its range of Siroko muck spreaders: the S4008/8V.

Designed on the basis of the smallest existing model of the range, the S4010/9V, it has the same running gear and body length (4 m) but its body height was lowered by 24 cm to reach 85 cm. The two removable vertical beaters with 3.5 spirals are 1,500 mm high with a diameter of 820 mm and remain fitted with teeth in HARDOX 450 steel and retractable blades at their base in order to keep the spreading quality offered on the whole range.

Thanks to this configuration, it offers not only a perfect stability, even in very steep areas, but it is also easier to load. Its capacity reaches nonetheless some 8 m³.

As for the rest of the Siroko range, several options are available, like the tight hydraulic guillotine door, aluminium or wooden extensions of 250 mm, as well as a PVC protection of the upper body strip.

Even if it is the smallest existing model of the Joskin muck spreading programme, it benefits – this goes without saying – from the same finishing quality and care taken during the manufacturing and development of all our products.

Standard equipment:
• Narrow monocoque spreader
• Walterscheid P.T.O.-shaft with shear bolt security
• Fully galvanized body
• Outer access ladder
• Standardized series production
• Cross-suspension drawbar with parabolic leaves
• Unbroken welds on the body
• Bolted flat eyelet (Ø 50 mm) (large plate)
• Body in HLE 550 steel + upper body strip made up of rectangular tube
• Hydraulic side stand (DA)
• Welded anti-projection headboard with grate
• Hydraulic brakes
• 2 shipping chains (Ø 14 mm)
• Recessed lighting
• Floor inversion by switching the oil connections at the motor outlet
• Wheels 400R22.5 cover
• Flow regulator with compensated pressure
• 2 vertical Ø 820 mm beaters in spirals on tube (Ø 140 mm)
• 1,000 rpm drive shaft - beater rotation speed: 423 rpm
• Removable shredding beater with 3.5 spirals
• Height of the beater: 1,500 mm
• Retractable blades at the base of the beaters
• Removable teeth in HARDOX 450 steel
• Crocs en acier HARDOX 450 démontables